Can you program two remote controls to work with the same adjustable bed?

Yes you can with our Comfort Elite Model as shown below.

STEP 1

Unplug base for 3 minutes, then plug back in. The underbed light turns on. Base is now in pairing mode.

STEP 2

Remove the battery compartment door from the remote control (FIGURE 6).

STEP 3

Using a pointed object, press and hold the LEARN SWITCH on the remote control (FIGURE 6) until the underbed light goes off.

Remote control for an adjustable bed in Mississauga Ontario

 

STEP 4

Unplug the base for 3 minutes and do steps 2 and 3 again and now both controls will work with your adjustable bed.

Back to blog